ask question about motor controllers

Roboteq controllers can be interfaced in a uniquely flexible number of ways. Each of these command interface modes can be assigned a different priority. A switching mechanism will enable one command mode upon the loss of another. For example the loss of serial commands will automatically enable the analog joystick to allow manual override.


USB Mode

Available on most roboteq controller, USB provides a simple interface to the PC for product configuration, monitoring and troubleshooting. On controllers without USB, serial communication can be used instead.

Pulse mode

Pulses can be captured in Frequency, Duty Cycle, or Pulse Width mode. Pulse width is the common way to interface to R/C Radios, and is the simplest and least expensive method to build and operate a remote controlled robot. In this mode, the controller supports many configurable options, including joystick calibration of min, max and center positions and deadband adjustment.
rc inputs

Serial Port (RS232) mode

Using the serial mode, the controller may be interfaced to a microcomputer for autonomous operation. Using a wireless modem or wireless network adapter (802.11), more advanced remote control operations are possible, including remote control via the Internet.
input analog

Analog Mode

A simple 0-5V analog control mode is also provided for direct connection to potentiometers or analog joysticks.

On all motor controllers, the range of the analog input (Min, Max, Center and Deadband) can be calibrated to meet the the joystick's range.



Up to 127 controllers can be networked on a low cost twisted pair network up to 1000m long and at speeds up to 1Mbit/s. Roboteq support four CAN protocols: MiniCAN and Raw CAN are two low-level protocols. RoboCAN is a simple but very effective meshed network protocol. CANOpen ensures interoperability with other vendor's devices.

Motor Controller Finder

Motor Type

Max Voltage

Number of Channels

Max Amps per Channel



MicroBasic Scripting


Total products: 62
Results: Show
Go to top